What type of pinion for E-REVO

Could someone help me on pinion type for the E-Revo please. I ordered mod1 and 32P with 5mm shaft opening. Will one of these work with the E-revo spur gear on an NEU motor.

[Arct1k]

Yes - Use brians calc to work out the right size - gear for 35-40mph for track and maybe +5 for bashing...

http://www.scriptasylum.com/rc_speed/index.html

Originally Posted by crazysavage

Could someone help me on pinion type for the E-Revo please. I ordered mod1 and 32P with 5mm shaft opening. Will one of these work with the E-revo spur gear on an NEU motor.

you will use 32p or mod .8...they are the same

Thanks again for the help guys.

You should probably pick some up in the 18 - 21t range.

Originally Posted by e-mikey

You should probably pick some up in the 18 - 21t range.

Thank you, I will be putting the Neu 1512 df in the truck and I was under the impression that this motor was somewhat high in the rpm range for the E-revo and since I was going to be running the MM until the MMM comes out, I opted for 14 tooth with the 61/62 on the spur. Will this make the truck a wheely monster? I would rather see 40+ mph than wheel stands.If you think I can safely turn 18 to 21t I'll pick some up.

Use BrianG's calculator but... I have the stock pinion in my e-revo, and have the 1512/2.5d. I think with a 22t pinion I would be around 40.