Medusa 60mm 2000kv in a Rustler??

[lutach]

Originally Posted by SunnyHouTX

No man, that is a 34T Integy spur gear that a friend contributed to my cause.

When do you plan on running that monster?

[SunnyHouTX]

I'll be drag racing it on 3S this Saturday and speed runs on 6S on Sunday with B4Maz.

[lutach]

Originally Posted by SunnyHouTX

I'll be drag racing it on 3S this Saturday and speed runs on 6S on Sunday with B4Maz.

Sounds good. I would lve to see videos of it running.

[SunnyHouTX]

There will be video of the speed runs at least.

[Raze ST Truggy]

Originally Posted by SunnyHouTX

Have fun man! There's no such thing as too much when it comes to power:

Could you point me in the right direction for the revo/ jato clutch swap for the rustler? I'm going to buy the FLM trans case, but am not exactly sure what clutch parts I need exactly for the swap. Thanks

-Brian

[SunnyHouTX]

Brian, it's as straight forward as swapping to the Jato spur gear IF you already have a slipper set-up in you Rustler. The Jato spur is Mod1 pitch so you will have to get some Mod1 pinions from RC-Monster.

If you don't have the slipper already, go to the Traxxas website and look at their schematics for the relevant part numbers and how it all comes together. Mine came with the slipper already so I didn't have to do it, just changed the spur gear.

Hope this helps.