Pay-It-Forward 2009

[JERRY2KONE]

Originally Posted by _paralyzed_

If I see a pic of a t-maxx w/ an aluminum tranny in it, pedeboi's screen name next to it, and the e-maxx aluminum tranny his uncle gave him next to it, I will eat my words.

It is still in poor taste to accept more than you give, when you have alot.

This is exactly the point of "PIF". What you should have done when you excepted gifts from us here is post up some of your stuff as a pay it forward gesture of your own. That is the way "PIF" works. Not collect a ton of great stuff from us for free, and then turn around and list a garage sale list of stuff of your own to make money off of.

[pedeboi364]

Ok then, i have a TQ and TQ3 with their RXs, BNIB no connectors but can solder some on Dynamite Tazer 15t ESC, rc18t full stock arms/bumper/towers

[_paralyzed_]

He has changed the story, again, and cannot provide the proof I asked for. He has an explanation but I am a professional bullshitter and I smell crap. There are inconsistincies (sp?) in his story.

A pedeboi thread should be started and from here on in people can make their own decisions about him.

the above post proves he feels guilt

[pedeboi364]

...pic sent paralyzed... i never told you i had the tranny on me. My uncle wants to sell it either way, he just thinks it'd more fun to build up a truck under it. He told me if i could sell it it's sold and we'll put a regular tranny in it. Just to clarify

[JERRY2KONE]

Originally Posted by pedeboi364

Ok then, i have a TQ and TQ3 with their RXs, BNIB no connectors but can solder some on Dynamite Tazer 15t ESC, rc18t full stock arms/bumper/towers

I will take the TQ3 and RX stuff for the builds my boys are doing if that meets with your satisfaction Pedeboi. If you need my address please let me know. Thank you for the PIF post and items. That is how this thread is supposed to work.

[_paralyzed_]

double checked that I gave him the right number. I did. Still no pics. Story still has holes. He's still only offering about $20 worth of stuff. I hate this shit.

[pedeboi364]

ok jerry, YGPM on that.

[Takedown]

Tisk tisk.... Thats low pedeboi.

[JERRY2KONE]

Originally Posted by _paralyzed_

double checked that I gave him the right number. I did. Still no pics. Story still has holes. He's still only offering about $20 worth of stuff. I hate this shit.

Hey there Harold I can see that you are a bit fired up about this to, but please take a deep breath and Whhhhooooosssaaaaaaa.... Let it go and calm your crazy butt down old man. Lets not let this thing ruin a whole day of R/C fun for us. Life is too short. I am sure that he and others have taken all of this in and learned a little something from it. I will still see tomorrow come and go, and I am sure that I will still look at the PIF thread as a good thing. Forgive and forget. It is not worth getting your tighty whities all twisted up in a wad, and not being able to straighten them out over. Give the kid a break and let it go. Lets move on to begger and better things. Matt is getting real close to having some of those Maxler chassis in hand. I know you already have yours, but these have been modified and made better still

[BL_RV0]

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

[George16]

[QUOTE=JERRY2KONE;258864]

Originally Posted by pedeboi364

^^^Holy crap

I can tell you that this is a quick way to get yourself black-balled from any brotherhood. RCM is not a sliesy flea Market, where you pick something up for next to nothing and then turn around and sell it for a huge profit in order to satisfy your bad habits. When we list our stuff in a "Pay it Forward" thread it is so that someone who needs the items gets a chance to acquire them either very cheap, or free for their use. We do not post up our stuff here so that you can jump on them and re-sell them for a profit young man. If you did not need the stuff, then you should not have replied to the post in the first place. I for one am angered and disgusted with your behavior. Then you lied in your post on the other site by saying that the tranny had been run like 5 times. You have no idea what that tranny had been through. I sent that stuff to you in good faith believing that you needed these items to help upgrade or better your own vehicles. Sure you can do whatever you want once you have them in your possesion, but this was dirty and underhanded, and you should be asshamed of yourself.

I replied to his rctech ad asking if the deans connectors were the same ones you sent to him.

[notnodak]

Originally Posted by BL_RV0

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

I have the two servos from my 3905 .They each need a gear but not the same one. If you want them they're yours. I just need your address again.

[mkrusedc]

Originally Posted by JERRY2KONE

...but I will still accept spare parts for their unfortunate breakdowns and such. I will send you a PM Sir, and thank you for your help with this as we appreciate the RCM support from everyone. I had even just purchased all the parts and built up a new tranny for one of them not knowing that we would be doing a Pay it Forward thread so soon. 2009 is going to be a great year.

I have a set of shock towers and gray 3906 bulks. Those are breakable items for sure. I'll mail this weekend.

[Tempted]

Originally Posted by BL_RV0

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

[Metallover]

Pedeboi said he'd send me some 12mm hexes for a few weeks now. I've seen nothing of them. If anyone has an extra pair of 12mm hexes, pm me.