Pay-It-Forward 2009

[_paralyzed_]

double checked that I gave him the right number. I did. Still no pics. Story still has holes. He's still only offering about $20 worth of stuff. I hate this shit.

[JERRY2KONE]

Originally Posted by _paralyzed_

double checked that I gave him the right number. I did. Still no pics. Story still has holes. He's still only offering about $20 worth of stuff. I hate this shit.

Hey there Harold I can see that you are a bit fired up about this to, but please take a deep breath and Whhhhooooosssaaaaaaa.... Let it go and calm your crazy butt down old man. Lets not let this thing ruin a whole day of R/C fun for us. Life is too short. I am sure that he and others have taken all of this in and learned a little something from it. I will still see tomorrow come and go, and I am sure that I will still look at the PIF thread as a good thing. Forgive and forget. It is not worth getting your tighty whities all twisted up in a wad, and not being able to straighten them out over. Give the kid a break and let it go. Lets move on to begger and better things. Matt is getting real close to having some of those Maxler chassis in hand. I know you already have yours, but these have been modified and made better still

[BL_RV0]

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

[notnodak]

Originally Posted by BL_RV0

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

I have the two servos from my 3905 .They each need a gear but not the same one. If you want them they're yours. I just need your address again.

[Tempted]

Originally Posted by BL_RV0

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

[JERRY2KONE]

Originally Posted by Tempted

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

I will take whatever he does not want for the boys project builds.



I have a set of shock towers and gray 3906 bulks. Those are breakable items for sure. I'll mail this weekend.

Sure thing mkrusedc. I will take them off your hands. I will PM my address.

[BL_RV0]

Originally Posted by Tempted

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

I will take it all!
Shoot me a pm if you need my PP address.
Thanks!

[JERRY2KONE]

I just wanted to share something with eveyone that Pedeboi is making good on things. Look I don't think he wanted to make things bad for anyone. It was just a young mistake, and now he has offered to send the tranny back to me. Of course I really do not need it, but I just found out about someone who really wants and needs it and has for a very long time. So he will send it to Paralyzed for one of his projects as his "Pay It Forward" gesture, and making good on his mistake. All is good in the RCM world. I hope that this will calm everyone down a bit now, and we can move on to bigger and better things. "Can't We All Just Get Along" comes to mind. I know I am happy now. Have a great day Gentlemen.

[notnodak]

I have 6 different noise eliminators I'll offer up. You wrap your esc lead around one a few times up close to the RX and it helps with radio interference on brushless with non/DSM radios.

[Modding_out]

Originally Posted by BL_RV0

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

Hey, BL_RVO. I was going to pif some titans from sjcrss, but I told him you need them more than me.

It's the best I have ''offer'' to the build, you and Jerry snatched up all the maxx parts before I even saw them. LOL