Help!!!!

[laser_cart]

just got inmy lipo's for my converted slayer and hooked everything up to mmm 2200KV combo and steering works fine throttle works fine but brakes is working backwards can't get it to work right anyone know how

[skellyo]

What do you mean "brakes is working backwards"?

[laser_cart]

im still using mechanical brakes and when i give brakes the servo goes the wrong way

[Arct1k]

Are you using mixing you need to probably invert that chanel

[laser_cart]

I'm running a Y harness on channel 2 for the ESC and brake servo

[lincpimp]

Sounds like you are using a y cable. Nothing you can do for that except put the linkage 180 deg from where it is now so that the lever action works in the correct direction. I had to do this with my revo.

[laser_cart]

Originally Posted by lincpimp

Sounds like you are using a y cable. Nothing you can do for that except put the linkage 180 deg from where it is now so that the lever action works in the correct direction. I had to do this with my revo.

im using a y cable i will try that but when i hit the brakes the RED light comes on does this mean something is wrong

[brushlessboy16]

red light on the esc Is good, that means its going to brake.

[rc4x4nut]

Have you tried a reversing Y harness?

[laser_cart]

I got it working moved servo arm and HOLY CRAP what a difference BUT it sometimes twitches l

[brushlessboy16]

lock the trans and use motor brakes then :)

[_paralyzed_]

.....could have just swapped red and black wires on servo.............

[BrianG]

Originally Posted by _paralyzed_

.....could have just swapped red and black wires on servo.............

Are you serious?

[BP-Revo]

Originally Posted by _paralyzed_

.....could have just swapped red and black wires on servo.............

If you did that you would have fried the onboard electronics on the servo.

[_paralyzed_]

Originally Posted by BrianG

Are you serious?

I was, temporary brain fart, I've been gone a while

Originally Posted by BP-Revo

If you did that you would have fried the onboard electronics on the servo.

BP-Revo is right, don't swap wires!!!!!!!!