GS-Racing XUT conversion

[Troopermanaic]

Originally Posted by brushlessboy16

read it. its for an ofna. this is not.

there is a slight possibility that it fits though

do you have any idea where I might be able to find a motor mount that will fit? just asking.

Worst come to worst ill just hack up my chassis but thats not what I am afraid of. I am afraid that the baring wont fit in the middle ill take some pics of the center diff and show them to you via PM.

[Troopermanaic]

my brushless kit I ordered is coming very soon and still don't have a way to mount it. They don't make plates for the GS xut to mount electric motors so woom if you can send me the blue prints from your motor mount that would be appreciated. I want to make one as well.

[Troopermanaic]

Actually I don't need the blueprints anymore but I cant find what pinion gear that is. The pinion gear I have don't fit on the spur gear. Its driving me nuts.

[RC-Monster Mike]

http://www.rc-monster.com/proddetail...rod=rcmgsstorm

Mod1 pinions are used on these vehicles, trooper.

[Troopermanaic]

Originally Posted by RC-Monster Mike

http://www.rc-monster.com/proddetail...rod=rcmgsstorm

Mod1 pinions are used on these vehicles, trooper.

Thank You so much for this information I just spent allot of money and bought this





and had no way to hook it up.

I am kinda skeptical about buying a part that belongs on a GS storm. If I buy that do you think it will fit on the XUT? And if it doesnt can I return it? I dont want to be stuck with something that the retailer "RC-monster.com" has referenced me.

BTW if the parts are interchangeable then it should be noted on the part description that way it will be less confusing also might end up generating more sales because if it said XUT I would have bought it already.

[RC-Monster Mike]

It has a lot better chance of fitting than the Ofna motor mount. I am about 99% sure it will bolt right onto the GS truggy - the only issue i can see is that the truggy shown here has a large spur gear, which will limit gearing selection(perhaps using a buggy spur gear is an option?). I have never had a GS truggy in my hands to verify whether or not the parts are compatible(or I would have mentioned it in the product listing as you suggested), but if I was a betting man I would say it will fit. It isn't likely that GS reinvented their center diff bulks when they made their buggy into a truggy. :)
If you purchase it and it doesn't work, I will gladly accept it back - as long as it is still saleable as new(if you drill it, scratch it up or otherwise disfigure it, then thisis a different story of course). We have Mod1 hardened pinions as well(we were the 1st to offer these, actually). :)

[Troopermanaic]

Originally Posted by RC-Monster Mike

It has a lot better chance of fitting than the Ofna motor mount. I am about 99% sure it will bolt right onto the GS truggy - the only issue i can see is that the truggy shown here has a large spur gear, which will limit gearing selection(perhaps using a buggy spur gear is an option?). I have never had a GS truggy in my hands to verify whether or not the parts are compatible(or I would have mentioned it in the product listing as you suggested), but if I was a betting man I would say it will fit. It isn't likely that GS reinvented their center diff bulks when they made their buggy into a truggy. :)
If you purchase it and it doesn't work, I will gladly accept it back - as long as it is still saleable as new(if you drill it, scratch it up or otherwise disfigure it, then thisis a different story of course). We have Mod1 hardened pinions as well(we were the 1st to offer these, actually). :)

sounds fair Ill buy it on Thursday. Thanks for your time mannn.