My upgrade e-revo (Wea)

[Wea]

http://picasaweb.google.ru/Wea1989/x...eat=directlink
Она едет ещё в перевернутом состоянии.

[molak]

crazy!

[remie]

You're a genius!!!

I was thinking about the same thing, but then with the motor mounted on top of the chassis instead of underneath it, and using a center diff.

Can you tell us a bit more about the parts that u used, and what kind of motor, esc and lipo combo you're using.

Kind regards remie

[Wea]

Motor medusa 3680(1600Kv), ESC mamba monster, Lipo- turnigy 5200 30C 2s, servo 1015 as.
Setup spur 36, pinion 19, 2s lipo. Speed 54 km/h

[Muggydude]

Wow, amazing! I can see that being one heck of a racer! My only problem is how the motor wires are exposed to be scraped on the bottom of the chassis. Could you route them up through the chassis on top?

[Wea]

У меня 2 e-revo и всего 1 esc я его перекидываю с одной шасси на другую. Провода можно убрать полностью.

[suicideneil]

Originally Posted by bing translator

I have 2 e-revo and only 1 esc I perekidyvaû from one chassis to another. Cables can be removed completely.

The wires are a bit exposed yeah, depends if the track is just dirt or has any small rocks or whatever to snag the wires on- routing would be simple enough though.

Really impressive build though, having the motor under-slung is a stroke of genius with the compact centerdiff/ spool unit to save space. I like the battery connector concept, though I'd want something to make a cleaner contact between the battery and panel- that mass of wire & solder looks a little bit iffy to me; Im thinking springy curved panel on the lipo, like how a deans connector works maybe..

Nice!!

[el tomaso]

Smart build!

TG

Originally Posted by remie

You're a genius!!!

I was thinking about the same thing, but then with the motor mounted on top of the chassis instead of underneath it, and using a center diff.

Can you tell us a bit more about the parts that u used, and what kind of motor, esc and lipo combo you're using.

Kind regards remie

Yeah! That would be the way to go. I wish some one could make a mount.

[E-Revonut]

Just seen this!!! That is by far the coolest revo I have ever seen! Personally I would have flipped the center diff/motor mount and put the motor on top. It would have raised the CoG a little but still much lower than any other Revo out there, and you would all the ground clearance still. Overall, it's still an incredible build.

[Semi Pro]

sehr nette bauen, viele von uns haben gesprochen, die die gleiche Sache mit outrunner Motoren

[Wea]

Hi all!
http://www.youtube.com/watch?feature...&v=JIbQtH4u4B4
http://www.youtube.com/watch?feature...&v=ScYF8Hry7bQ
http://www.youtube.com/watch?v=XSm2s...ayer_embedded#!

[George16]

Great vidoes!!!!!

[Urgeoner]

pretty slick...reminds me of that old tyco car that could be driven whether it was right side up or upside down...the ricochet or something like that. much props!!