Brushless swap problem

[T-birdJunkie]

Originally Posted by suicideneil

Im guessing thats a brushed esc after seeing some pics of it.

Now STFU & GTFO you idiotic troll who knows nothing about escs & motors, or the ban hammer awaits...

You JUST figured that out?
It's a Novak Cyclone, FFS. I EVEN SAID THAT It literally took me thirty seconds to solder those motor leads (which came off my RS) to the speedo. And I'm still wondering how you think my solder joints are crap.

Originally Posted by slimthelineman

Slimthelineman would expect nothing less from the funkyjunky and his phony credentials. Yup a three wire brushed controller will run a brushless motor fine! Ha ha.

FYI if your only cutting your comm every 10-14 race days your retarded. Brushed motors need more service than that. Your getting 30+ runs on a cut and set of brushess? Makes no sense. Even when I ran the round brush checkpoints I had to cut every ten runs or less to keep the motor runnin like a raped ape.

Why didn't you post this on rctech huh?

Because you and suicideneil are the only ones that are short-sighted enough to believe somebody that owned an RS Pro, a 10.5 and a 13.5 (which were all mentioned in this thread) would do this and expect it to work.

You guys are far too easy.

And if you had to work on your motor more often than that, then you obviously were running some crap Venom motors or something. And you missed the part where I said I'd clean the comm and change brushes between cuts.

Learn to read something other than erroneous electrical theory BS.

[brian015]

Originally Posted by T-birdJunkie

You guys are far too easy.

T-birdJunkie:

Wow - YOU GOT US!!!! I can't believe it - we are SOOOOOOO EEEEEEAAAAASY!

I mean, you posted at 2:52 AM yesterday and by 5:07 AM there were 3 posts telling what was wrong with your picture and calling it a prank.

Man - did you get us!

T-birdJunkie - YOU RULE!!!!!!!!!!

[brainanator]

This is what you're resorting to now? Trolling other RC forums? (terribly I might add) Hope ya feel like a big man now Mr. Thunderbirdjunkie. Sure put us to shame.

[suicideneil]

T-bird, given how much of a douche you clearly are, I wouldn't be surprised at all if you are stupid enough to solder a BL motor to a BEC and expect it to work really.

I was talking about the Tekin esc when I said it appeared to be brushed, not the Novak esc which everyone knew was brushed from the start.

Im guessing your life is so empty you have to resort to spamming other forums with crap in order to amuse yourself right? Go troll the nitrokillers forums and see how long you last.

[slimthelineman]

Yes but at least I CAN read gaybirdfunky. I ran checkpoints over your beloved venom products. Don't be mad when someone gives you the truth and you don't like the answer. Good thing your smart enough to figure electrical theory out on your own....

[x-y]

XD .... thats fan ;)

[crazyjr]

I wasn't, you missed this on page 1.

Originally Posted by crazyjr

If this is the same T-birdjunkie on rc tech forum, it's got to be a prank. With 22 posts, in the best place for brushless, you asked the wrong questions

Only reason, I said what I said on page 2, was if for some reason you weren't who i thought and really did something stupid. One problem with the pics , no blackening due to the proposed cookout

[T-birdJunkie]

When I said "you guys are easy", I was referring to suicideneil and lineman...those are the easy guys :p

This was meant solely as an exercise in humor, and anybody taking it any other way takes life waaaaay too seriously ;)

[T-birdJunkie]

BTW slim, it's awesome you think so much of ThunderbirdJunkie to make a thread dedicated to his awesome sense of humor on RCTech.

You really are a standup guy :)

[slimthelineman]

Your welcome. Whether it was real or not it did actually put a smile on my face so I thought I would share. And if you can get a way to serious guy like me to smile then your on to something and should be able to make others lol with it. Only wish it were true so I could poke more fun but I think deep down inside I knew all along that 1: your really not that stupid and 2: if you were you definately wouldn't post such said stupidity on rcm. Oh well maybe next time we can catch you with your doodle in hand.

[T-birdJunkie]

Originally Posted by slimthelineman

Oh well maybe next time we can catch you with your doodle in hand.

When ThunderbirdJunkie has his doodle in hand, RCM is not the website he's perusing