23 mm adaptors for 6mm axles

Hello I have an emaxx with the UE 6 mm axles and the 14 mm nuts. Where can I find some 23mm adaptors to use with these axles. all the adaptors I see are for the standerd emaxx axles with the little pin through it not the hex shape. Thanks

[Serum]

Dace are the apaptors you need. Available in blue and black. They use a 14mm hex.

[neweuser]

the dace are real nice. And they work great! I run them with my UE 6mm

[Sneeck]

Dace only work's with the ue cvd's. Way better than the pin-type cvd adaptor's, since the pin will wear into the alum.

[neweuser]

Actually Sneeck, any 14mm hex will fit into the dace....even the stockers. But if you put the stockers on too tight, the pin will wear thru yes.

[Sneeck]

Doh, yes your right. I keep thinking the dace will go directly on the cvd.

[Serum]

LOL, that's what i thought when they launced them too.. A 5mm hex instead of a 14... :p