Project Green Monster

[gtxracer]

Well, I think it's time for me to get my E-Revo project started. I've owned nothing but nitro vehicles until now and I like everything brushless has to offer. Here's the specs on my truck and some future plans as well.

2.5 chassis, de-anodized
MX-3 system
94358 for steering
FOC
Tranny locked in 2nd
RD Logics steering brace
Spotraxx on Velos
Shock socks, etc

Going to run the electronic brake, removed all that stuff. Lost weight with the throttle servo and mount as well as the stock receiver/battery box. I'll be trying to get the truck as light as possible with even more weight reduction. Carbon fiber chassis from Vantage, JD Carbon hinge pins, turnbuckles, and pushrods, carbon rear support plate, and some carbon plates to finish up the battery mount. Here's the parts I have left to order:

Feigao 9XL with XL heatsink
RCM Motor mount
15T pinion (36 spur)
Mamba Max
BEC
4S1P LiPo
Tekno Rx box
new lid (maybe 07 silverado)
battery tray

I'm looking at the Twin Force tray from Mike. I plan on adding some carbon fiber plate on the outside and the ends to make it reinforced. Not only strong but also lightweight. Oh, and the reason it's called Green Monster is because it's going to have a nice little green theme. A lot of blacked out parts too, but green for sure. I'll have to remove the anodizing from the Feigao but it shouldn't be a problem.

Here's some pics to keep you guys satisfied until the real hardware comes in!

Being torn down from nitro form


stripped



locked tranny mod (notice the screen, haha)


All nice and clean





And look what else I got....and a LBA10 too