Inrunner / Outrunner

[lincpimp]

If you can run something similar to 5s lipo, I would say that an align 600xl would be your best bet. You may get away with the l model on 6s and gear down but the xl is not much longer and will handle the load better.

I have been meaning to run the l version I have in a buggy but have not got around to that yet. I tested both the l and xl in my emaxx and they worked fine, much more torque than an inrunner but not as fast to spool up. Ended up feeling smoother to drive.

On a side note the quark escs work these kinds of motors well, not sure about other escs though...