WARNING! A new way for MMMs to fail including your precious V3!

[macr0w]

When I first saw the bullets on the newer MMM's I thought it was cool, until I installed it.

I would much rather have wire directly soldered to the board.

The bullets are just one more connector we don't need.

Not to mention the clearance issue. In a Revo or truggy I guess it's not such a big deal. But in a buggy with a tight body it is a big deal.

Gimmie my old style wires back.

I took the bullets off of my v3 and direct soldered the wires to the female side of the bullet at 90 degrees. So far so good.