Another melt-down.....i cant believe yet......

[streethot]

My setup

Chassis RC8
Batt Neu Energy 25/50C 4s 5000mah
MMM with 2650kv motor
Diff 43/10
Center Diff 46/18

MMM Setup
Punch control 100%
Start Power low
Timming 5 (or zero)
Brake 60%
Reverse 50%
no mech brakes

Is this it???

I am missing something??? 45mph car to run on open park, some jumps......

I made some speed runs in the park, very nice, but the is not that fast ok, only have a great acceleration, and jumps, hi jumps, but all made perfectly......and after the last jump, i felt in the air the car didnt corrected as i wanted, landed ok, but the car was still after landing, tried twice punch the throttle and start running as crazy because i already know what would happen, unfortunately i didnt get there in time, and needed to wait until fire stops......

batt conector was unsoldered on battery side
batt cable inside MMM was unsoldered
1 motor wire got unsoldered inside the esc

I have contacted CC and I will send to them the esc.....


I have raced this car on a 46/16 gear on a very tight track, with many jumps and it was Zero problems, and only warm temps.....i dont know.....

Any input or comment on this would be great........