Most Important Flux Upgrades?

[JThiessen]

Originally Posted by thzero

Actually TCS has a 5mm standard length Flux chassis. They also have I think a 4.6mm XL length Flux chassis too. Of course there is now the HPI XL length Flux chassis.

The stock shocks are the same thing as the HPI Big Bores, just they are plastic instead of aluminum bodies.

Either the Castle Link or the programmable card. Then, especially if under 6S, you can tone down the punch control.

Good point on the Castle link. I have so many, I forgot they dont come with them.
I didn't realize TCS made a XL length chassis. Whichever chassis you go with, you will need to make sure it comes with the XL rear center dogbone - or order one seperate (I think FLM is the only one that sells without the dogbone).

Originally Posted by V0RT3X

Tierod eliminators on the rear. Integy makes some and Atomic RC does aswell.

http://www3.towerhobbies.com/cgi-bin...?&I=LXWSX9&P=7

While nice to have (I have the Integy), not really a necessity unless you plan on putting LST shocks on.