Quote:
Originally Posted by OZ-RUSTLER
...If some of you can help me with working out how my lipo's went, it would be much appreciated. I had the LVC at 3.4v and when it hit, I just disconnected the lipo's and took a reading of voltages and all cells were around the 3.7v mark...
|
I assume you want to know why the LVC was set at 3.4v/cell, yet the cells were 3.7v when measured? Two reasons: 1) cell voltages will drift back up a bit when left unloaded for a few minutes, and 2) depending on how the LVC actually works, if it read a momentary 3.4v/cell voltage sag because of high acceleration urrent, it would trip the LVC even though the nominal voltage is closer to 3.7v/cell.
Nice job by the way!
Threaded Mode
