UE 6mm CVDs question

[WheelMan]

Originally Posted by Arct1k

That's them

Originally Posted by JERRY2KONE

But Chris will those fit onto the UE axles?? Or are they for use on TRX style axles??

You know what I just realized those are for 12mm to 17mm, not 14 to 17 like what I would need. Of course I would much rather just have 1 hex that fits directly to the axle, instead of putting a hex over a hex. But at this point I'm just looking for something that will work and hold up.

Those fastlane adapters fit over a 12mm hex and adapt to a 17mm hex, and they also offset the wheels by an extra 1/2" on each side.

Originally Posted by JERRY2KONE

Yes that is the guy. He made quite a few sets and you will find a set sooner or later. And no problem at all. Helping out each other when we can is what makes the RCM & UE forums so great. There are a lot of great people on both sites and if you cannot find the answer on one of the two you might as well forget about it. I use to be a member on a half dozen sites when I first got into the hobby, and after the first year gave up on the rest because of all the rediculous rules and adolesent behavior. Besides RCM & UE were the only two places designing and making good quality parts for the Maxx line.

I have to say, I do like these 2 forums a lot, they have both provided me a lot of very useful knowledge already.


-Travis