5mm gears?

[lincpimp]

Ok what motor do you want to run? A 8-9-10 l leigao would be fine in a pede. I have a 12s which is 3000kv or so and run 15/54 gearing in it on 3s lipo. No problems at all, tems are acceptable, and run time is around 40-45mins bashing on a 4000mah 3s lipo. My truck is mostly stock, so it is light, a heavier truck would be ok since you would be using a l motor. I would say use a 3000 kv motor, 8l, and 14-16/58 gearing, on 3s lipo and it will be a hoot.

[mach1stang]

Originally Posted by lincpimp

Ok what motor do you want to run? A 8-9-10 l leigao would be fine in a pede. I have a 12s which is 3000kv or so and run 15/54 gearing in it on 3s lipo. No problems at all, tems are acceptable, and run time is around 40-45mins bashing on a 4000mah 3s lipo. My truck is mostly stock, so it is light, a heavier truck would be ok since you would be using a l motor. I would say use a 3000 kv motor, 8l, and 14-16/58 gearing, on 3s lipo and it will be a hoot.

well i have a 6L in it.

[lincpimp]

Originally Posted by mach1stang

well i have a 6L in it.

I would gear it 16/58 for the 6l and run good 2s lipo packs. Like a 2s 8000 maxamps pack. That setup will have tons of power, but battery requirements will be high. I would not go 3s with that high kv motor, but that is just me. You could, but you would need to run a smaller tire to help lower overall gearing.