T maxx hv conversion

[sikeston34m]

Linc, This is going to be an Awesome Conversion!

Is that the modded 1/8th diffs I see peeking out from in between those bulkheads?

[lincpimp]

Originally Posted by squeeforever

You need T/E-Maxx 3.3 ones. Revo won't work I don't think.

Yep, did some research and found the part#s that i need. Should be 5141 5143 5347 and 5355. That covers the two different length rods and the pivot ball/spacers.

Originally Posted by sikeston34m

Linc, This is going to be an Awesome Conversion!

Is that the modded 1/8th diffs I see peeking out from in between those bulkheads?

Thanks Sike, just need to make up a motor mount and battery trays and it should be ready to roll. I will try to get the steering and brake servos hooked up tomorrow, and maybe the bumpers, etc. I just ordered all 8 shocks, 28 bucks inc s/h from fleabay! And I should have the esc and prog card next wed. This project may come together sooner than I planned!

And yes, those are the aftershock diffs hanging out in the stock maxx bulks. This drivetrain looks very solid! Hope it can hold up to the 20xl on 10s!