T maxx hv conversion

[sikeston34m]

An aluminum Adapter would be a good idea.

I was thinking I seen a 46 tooth ring somewhere.

A 10/46 setup would be something good to work with.

[lincpimp]

Did a little work today, got the front diff installed and am looking forward to the mail tomorrow as it has the diff output shafts, adapters for the 8mm pinions to use revo shafts, and a set of driveshafts. If all goes well tomorrow evening I should have a complete roller. I am thinking of flipping the chassis over so that the batteries trays will fit flush, right now the chassis bends up slightly on the sides, and that is where the edge of the battery trays will be.

[its me]

Originally Posted by sikeston34m

An aluminum Adapter would be a good idea.

I was thinking I seen a 46 tooth ring somewhere.

A 10/46 setup would be something good to work with.

you ever thought about a planetary gear box on both ends?

http://img.diytrade.com/cdimg/85838/...1129176311.jpg

ive been trying to read up on some.