neu motor and 18.97 speed control

[auto2]

good info and I tried it but it didnt help.
either i have a solder joint that feels solid but went bad or the esc is NG
will wait for the MM in the mail and see if that solves the problem. then have to get the 18.97 fixed ?

[rhylsadar]

hi
you argue kind a strange.

the motor went bad 3 times. each time all of a sudden it would just cog fully and not even move the buggy even in the air. each time a new motor fixed the problem.

the new motors fixed the problem each time. and now you hope that a new esc will fix the problem?

it seems you are dealing with several different or new problems here.

bye
rhylsadar

[auto2]

i put a new motor in it. and it does the same thing. you make it sound like i went straight for the esc and didnt try a motor first. the whole point here is i assumed the motor was bad-changed it- and still have the problem.
getting a mm any day now and we will see if that fixes it. possible all these bad motors from fine design damaged the esc.

so now I have a neu and a MM