Me and My Axi-Maxx Video's!

[sikeston34m]

Originally Posted by lincpimp

Just a thought, how about a pair of them, since they are using the same spur you may be able to wire them to the same esc. Griffinru did it and I have a pair of aveox motors that i wanted to wire to the same esc, but could not figure out how to time them the same. Someone recently posted to hook up a battery to two of the leads on each motor and they would be timed the same.

That's very possible. I might try that. It would work with much higher gearing then for more top speed. Use the 25 tooth pinions with a 36 tooth Revo spur. Hmmmmmmm..............

Dr Kros, I want the 4 turn.

In comparing the internal resistence values:

AXI 2826/8 is 30 mohm's

The KMS 2826/4 turn is listed as 64 mohm's.

If I were to speculate, my guess is the KMS is a Wye wind. This might make it even better than the AXI. I wonder what kind of magnets it uses?

Another thought here is, I bet the AXI endbells would fit the KMS stator assembly perfectly.