 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
03.21.2008, 12:46 AM
That is going to be so wicked!!
I wouldn't use anacondas, but that is just a personal choice. GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Check out my huge box!
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
|
03.21.2008, 01:52 AM
I have the rush arms, and want to try them out. I have done a few different arms mods to pedes and rustlers, and this looks to be the best.
Snellemin, what tires would you suggest? I would like to have something between 3.8 and 4 inches tall. |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC Wanna BE
Offline
Posts: 340
Join Date: Jun 2007
Location: Southern Utah
|
03.21.2008, 07:42 AM
There is no way you will keep the front end on the ground!!!! That thing will scream. I bough a rustler from a guy and he put a bandit top on it. I tried 4s2p just to see what would happen. Its out of control after 55 mph. No stearing what so ever. Good luck and post a vid!!!
Emaxx Tranny slipper modification (Strobe like) http://www.rc-monster.com/forum/showthread.php?t=9341 |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 179
Join Date: Feb 2005
|
03.21.2008, 08:25 AM
What do you do to keep the driveshafts from breaking?
Promod Brushless from the Start! |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
working on a brushless for my wheelchair.....
Offline
Posts: 4,890
Join Date: Mar 2007
Location: minnesnowta
|
03.21.2008, 09:18 AM
I have metal u joints and plastic sliders and they hold up, I think the biggest thing to keeping driveshafts intact is driving style. If it swaps ends let off the throttle. If its rolling backwards WAIT for it to stop. Ballsout driving is fun but destructive. If I don't follow these rules I can snap shafts no problem but with a little restraint I can run all day and still have a blast.
It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper. |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
Guest
Posts: n/a
|
03.21.2008, 10:59 AM
I have kept my VXL Rustler stock as much as possible, the only non drive train upgrade has been RPM casterblocks, but right now it is powerful enough ,any more and it would be too out of control, and I do enjoy "out of control"....
 . I just have to have a more subtle trigger finger from a stop, and all my repairs have been front end related. I have been running these Ofna 1/8 scale hard foam wheel/tire combo, they don't ballon but if there is a significant amount of dirt/dust on the road it will lose traction.here is a link to the wheels http://www3.towerhobbies.com/cgi-bin...&I=LXKKF5&P=ML 17mm wheel adators http://www.neweramodels.com/item.cgi...=&part_id=8538 |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
