Plans to carry 10 Ga wire and 6.5 bullets?

[dirt101]

well heres my question. can 4mm plugs be soldered on the GIGANTIC 10g wire? Im not sure if there is enough clearance.

and is a 4mm plug enough to handle a 1515 2.5d on 5s in a CRT.(geared for 37mph)

Originally Posted by dirt101

well heres my question. can 4mm plugs be soldered on the GIGANTIC 10g wire? Im not sure if there is enough clearance.

and is a 4mm plug enough to handle a 1515 2.5d on 5s in a CRT.(geared for 37mph)

you will want to use bigger connectors than 4MMs at least 5mm, I have soldered 4mm plugs on 12awg but it was a chore, I had to remove some wire strands

[Sammus]

Originally Posted by dirt101

well heres my question. can 4mm plugs be soldered on the GIGANTIC 10g wire? Im not sure if there is enough clearance.

and is a 4mm plug enough to handle a 1515 2.5d on 5s in a CRT.(geared for 37mph)

I use 4mm connectors (stock sidewinder esc) on my CRT.5 running a Feigao 9L and 3s, geared for about 34mph on brians calc, nothing ever gets the slightest bit warm so I'm thinking the 4mm spring connectors are up to the task.

Originally Posted by Sammus

I use 4mm connectors (stock sidewinder esc) on my CRT.5 running a Feigao 9L and 3s, geared for about 34mph on brians calc, nothing ever gets the slightest bit warm so I'm thinking the 4mm spring connectors are up to the task.

I have 4mm plugs on my 4s Rustler with a 9L being geared for about 70 mph

[Patrick]

Originally Posted by dirt101

well heres my question. can 4mm plugs be soldered on the GIGANTIC 10g wire? Im not sure if there is enough clearance.

and is a 4mm plug enough to handle a 1515 2.5d on 5s in a CRT.(geared for 37mph)

I have some 4mm plugs with that motor on 5s in my truggy. They handle the power well enough. Don't about fitting 10g wire though.