mmm v2 close

[TruckBasher]

Originally Posted by traxxasrevony

i should have it tomarrow seeing as i got my mm back 2 days after i got the email notifacation so i can post some pics of it.

I guess this will answer everything....

Let us know how V2 performs...

[MTBikerTim]

I have an MMM being repaired and I am waiting on 2 other new castle escs that I ordered ages ago. When will the pain end. I need escs . Everything brushless seems to be out of stock at the moment. I'm trying to order a VXL Rustler and they are out of stock most places as well.

[traxxasrevony]

i really wanna test it out but tomarrows looking to be the only good day for a week. till next tuesday theres a good chance of rain everday. ill have to see if i can call in sick tomarrow

[TexasSP]

I stand corrected. I think you can appreciate my skepticism though being the internet and all.

[Pdelcast]

Originally Posted by TexasSP

I stand corrected. I think you can appreciate my skepticism though being the internet and all.

My fault -- I should have got on here a couple days ago when we ran the first panels and ran into the solder stencil problem.

Patrick

[TruckBasher]

Glad to hear everything is in order...but I hope no further delays will happen cause my trucks are getting impatient LOL just kiddin'

Luck with the testing Traxxasrev..make sure you give this MMM a beating....but hope you dont burn your motor :)

[traxxasrevony]

i was worried about it going up when i first stared doing real speed runs with the mmm
i was running it pretty hard on 20/38 and temps only hit 170 a few times. and i hit 53 mph with it. i really need a neu but 255 is a big hole in my pocket after so ill upgrade when the feagio goes out

[ogrfre01]

Does this mean more delay or what? Im really thinking about canceling my order and maybe ordering a new one till next summer instead and then buy the MMM+1512 combo.
Is it another 2-3 weeks from now, and then another week or two until they get here (sweden)?
I would really want a straight answer...... im so tired of all the delays and my vacation is over in a couple of weeks so..... i placed my order in the beginning of May....

[TDC57]

Welcome to the group!.. Personally I don’t believe CC will have the MMM ready to ship out until mid August.. and yes I will put my money where my mouth is!, who wants to bet $20 (??) CC isn’t going to be releasing the V2 “MMM” until at least the 12th or August..

Any takers how about you Patrick
I’ll bet up to the cost of a MMM so that means I’ll take (8) peoples money or two it just needs to total up to $160.00


Just so we are straight on the bet..

Mike needs to receive and send out the MMM’s on or before the 12th, that’s still more than 3 weeks away from this point, if that happens just send me your email address and I’ll Pay-pal you the money, if it doesn’t happen I’ll send you mine you and send me the money..

So who’s in / down for the bet (??)


P.S.
I'm doing this to prove a point, you have all been fooled into believing what they want you to think, I do big business like this all the time and CC know the date now!, hell they’ve know for a while but for them to come out 2 month ago and say it’s a 3-4 month fix would have driven all prospective buyers away, so they have been feeding just enough information to keep the masses interested.

Hell they knew they were going to do further bata testing but they they ever say that NO.. Why because that more time and more chances for people to go else where. it's all been a line people..

I for one have been calling their bluff from the beginning and will continue to until they provide product I paid for close to 3 months ago and still have not received..

I'm sorry but I'm just not a Fan of the CC now, but hopefully I will be in the future.. TBD at this point..

[Pdelcast]

Originally Posted by TDC57

Welcome to the group!.. Personally I don’t believe CC will have the MMM ready to ship out until mid August.. and yes I will put my money where my mouth is!, who wants to bet $20 (??) CC isn’t going to be releasing the V2 “MMM” until at least the 12th or August..


I for one have been calling their bluff from the beginning and will continue to until they provide product I paid for close to 3 months ago and still have not received..

Yeah, I'll take that bet. But make it worth my while -- $20.00 pfft..
How about $500.00?

Since we have already shipped about 40 MMM V2s does that mean I win?

Fineline Stencil is delivering stencils on Monday morning. I confirmed that this morning. Production starts Monday -- so we should be shipping before the end of next week. Now, depending on where you bought your Monster, you might not get YOURS until much later -- but that won't be Castle's fault.

Originally Posted by Pdelcast

Yeah, I'll take that bet. But make it worth my while -- $20.00 pfft..
How about $500.00?

Since we have already shipped about 40 MMM V2s does that mean I win?

Fineline Stencil is delivering stencils on Monday morning. I confirmed that this morning. Production starts Monday -- so we should be shipping before the end of next week. Now, depending on where you bought your Monster, you might not get YOURS until much later -- but that won't be Castle's fault.

do those 40 people have e-mails? or will it be a surprise? I just bought a new lipo from Mike today for my MMM when it gets back. hopefully soon, thank you for the update. I bought my monster direct ;)

[Pdelcast]

Originally Posted by DickyT

do those 40 people have e-mails? or will it be a surprise? I just bought a new lipo from Mike today for my MMM when it gets back. hopefully soon, thank you for the update. I bought my monster direct ;)

Ahhh, you should have been contacted already if you got one of the MMMs...

So if you haven't heard anything, you probably aren't getting one of the early batch.

We ran into a problem with one of the stencils, which required a LOT of handwork to rework, so we just built a few MMM 'til we could get the new stencil.

[theJoker]

Originally Posted by Pdelcast

Ahhh, you should have been contacted already if you got one of the MMMs...

So if you haven't heard anything, you probably aren't getting one of the early batch.

We ran into a problem with one of the stencils, which required a LOT of handwork to rework, so we just built a few MMM 'til we could get the new stencil.

Thanks for keeping us up to date.


Patrick does mike know how may v2 she will be getting?

If he does then we can ask Mike when all of us pre order folks will get ours. I am in the 2nd batch of pre orders ....

Originally Posted by Pdelcast

Ahhh, you should have been contacted already if you got one of the MMMs...

So if you haven't heard anything, you probably aren't getting one of the early batch.

We ran into a problem with one of the stencils, which required a LOT of handwork to rework, so we just built a few MMM 'til we could get the new stencil.

Thank you Patrick. Off to the LHS's to find an MM to void warranty on then :D

[TDC57]

Originally Posted by Pdelcast

Yeah, I'll take that bet. But make it worth my while -- $20.00 pfft..
How about $500.00?

Since we have already shipped about 40 MMM V2s does that mean I win?

Fineline Stencil is delivering stencils on Monday morning. I confirmed that this morning. Production starts Monday -- so we should be shipping before the end of next week. Now, depending on where you bought your Monster, you might not get YOURS until much later -- but that won't be Castle's fault.

Your on.. No Bata test does not count (PLEASE). Lets get real..

I'll take that bet!! not the full $500.00 sorry but i'll bet you full price of the ESC that Mike at RCM will not receive and send out his second / first full order of the original ESC that where paid for in May.. I'm part of the first original order and will happily pay you if it gets here and it works by 08/13/08.

Here is my email confirmation that I prepaid in May / on the first order. I'll send you confirmation if and when I receive the MMM, if it's past the 13th you owe me, if not I owe you!..

It's that simple..

Do we have deal (??)


Order ID: 10008774
Customer Details:
Shaun

Shipping Method: Priority Mail (With Insurance)
--------------------------
Product ID: mambamonsteresc
Product Name: Castle Creations Mamba Monster controller
Quantity: 1
Unit Price: $170.00
--------------------------
Order Total : $170.00
Shipping : $6.30
Discounts : $25.00
Grand Total : $151.30



P.S to CC.. (For What it’s worth from a California native) / GREEN…..
Whenever this is someone who wears mink coats, there is always someone who will though blood on it, whenever there is a smog polluter there is someone who will reports you, wherever there is the little man getting the short end of the stick (not told the truth) by a corporation we will be there are there calling your bluff ever step of the way..


Thank you for your time and regardless what you think, I am truly looking forward to receiving the product I paid for months ago, I'm just sorry it took Soooooo long to (possibly / TBD) get it right…

Shaun….

P.S.S.
Yes I am a Pain in the ASS.. Someone has to be!