Aussie CRT X2

[RC-Monster Mike]

That is our new CR Motor mount alright - we constantly update our parts in between production runs as we go - sometime we simply find a "look" that we like, and sometimes we add some utility (mech. brake capability, for example, was not initially on any of our motor mounts). This is a benefit of being a small, low volume shop with our own parts - we can quickly update/change as we see fit. :)

100% Mikes CR mount .
Don't want to remove the centre chassis brace as it will let the chassis flex to much and effect handling .
Putting a little notch in the CR mount was no big problem , took all of 5 minutes .

Very nice build ...I'm in the process of converting a CRT-x1 truggy...my first conversion......I have the stock tire/wheel combo ..my tires seem a lot wider then yours ,what tire/wheel combo are you running ? i would like to go to the narrower tire like yours....i was afraid to notch my motor mount (same mount as yours ) as i didnt want to weaken it any ,does it seem ok with the notch ?...thank you for the help and any advice ....

Originally Posted by CRTIM

Very nice build ...I'm in the process of converting a CRT-x1 truggy...my first conversion......I have the stock tire/wheel combo ..my tires seem a lot wider then yours ,what tire/wheel combo are you running ? i would like to go to the narrower tire like yours....i was afraid to notch my motor mount (same mount as yours ) as i didnt want to weaken it any ,does it seem ok with the notch ?...thank you for the help and any advice ....

No problem notching the mount , just do little at a time until it just clears , there is plenty of meat left on it .

As Arct1k speciified they are stock LPR tires and wheels , they look narrower because they are the largest wheel you can use under the rules so the tire is stretched out more and has less sidewall / tire looks narrower .
Tires are great they work similar to Crimefighters .

Been a while guys so thought i would post a little update , i'll be quick .

Body was done in UpgradeRC custom skins , and i am now running Lucianos 6s esc ( it's running great and if it continues to do so i will be selling my new MMM v2 ) .

I will now be using the X2 as my basher so i might go from a 15t pinion up to 17t or probably 18t as the esc ,motor and battery are staying cool , all between 95 o - 110 o .
Have been using the Zippy 5s 4000mah packs and am very happy and getting 18mins before the lvc on the esc kicks in .


I made a plate for the esc which attaches to the center diff top plate using the existing top plate mounting holes , the esc is then attached with velcro and some zip ties .

That's it for now , oh some pics as well .

[lutach]

Originally Posted by ffactory666

Been a while guys so thought i would post a little update , i'll be quick .

Body was done in UpgradeRC custom skins , and i am now running Lucianos 6s esc ( it's running great and if it continues to do so i will be selling my new MMM v2 ) .

I will now be using the X2 as my basher so i might go from a 15t pinion up to 17t or probably 18t as the esc ,motor and battery are staying cool , all between 95 o - 110 o .
Have been using the Zippy 5s 4000mah packs and am very happy and getting 18mins before the lvc on the esc kicks in .


I made a plate for the esc which attaches to the center diff top plate using the existing top plate mounting holes , the esc is then attached with velcro and some zip ties .

That's it for now , oh some pics as well .

Looks good. I hope those capacitors are secured with some kind of tape to keep them from bouncing too much and breaking off.

Originally Posted by lutach

Looks good. I hope those capacitors are secured with some kind of tape to keep them from bouncing too much and breaking off.

Done before i ran the esc

You can see the review of it in your thread .

Drift thanks for the compliment , it's quite easy though with the skins .