KB 45 XL got a competitor ?

[Mister-T]

I just found this, this guy is already selling some OEM Hobbywing ESC and feigao Motors



http://cbracingshop.com/catalog/prod...7c8f2c965f8996

[Takedown]

Kinda expensive aint it? Reminds me of the velineon because of the hex screws.

[MetalMan]

It is quite expensive, but would be a nice option. For many it's nice that it has a standard 540 mounting pattern, but I don't like that. I prefer the 30mm spacing and 4mm bolts that the KB-45 uses. The screws holding the endbells on are a nice touch, though.

[Mister-T]

A legal BL motor for 1/10 scale racing is sold around 100 € these days... so it's no that expensive. Everthing sold in France take 19,6 % of TAX

[rootar]

maybe it will run cooler having so much more torque than just a standard XL, so who is gonna order one and test it out?

it is a hoss of a motor at 45mm diameter smooth can and XL length, and at 550 grams it out weighs all of the other motors we are using.

i bet it would run good, prolly wouldnt get great runtime but you never know.

[rootar]

i wonder who that is? because he also sells RC-monster stuff

[Arct1k]

Christophe Boulet
N. 1 allée Marguerite Givernis
Résidence le Saint James Bât. A Apt. 35
34080 Montpellier - France -

[bruce750i]

I think it said it has a 5mm shaft. At the bottom of the page, the pinion teeth are called dents. Thats different. I think thats close to $160.00

[sleebus.jones]

6 pole motor too. Hmm.

[killajb]

Interesting find. I wonder if another vendor carries this motor. I'm not sure if this correlation can be applied, but running a mamba 280-sized motor in my mini-inferno was nothing but a heat pump. I switched to a 400-sized can with tons more torque and about half the kv value and got way better performance and reliability.

[Mister-T]

Originally Posted by sleebus.jones

6 pole motor too. Hmm.

Hu, it 's a 6 turn motor where did you read 6 pole ?

[bruce750i]

Excuse my French but,

Caractéristiques :

2150 Kv
Bobinage 6 tours
Max 120A
Plus de 2000 Watts maxi
Voltage max recommandé : 25V
Diamètre : 45 mm
Longueur : 76 mm
Poids : 550 grammes
Entre axe trous de fixation : 25 mm standard 540
Format équivalent à un Speed 700 en taille
Axe moteur 5 mm avec méplat
Rotor néodyme diamètre 24 mm
Cage démontable
Roulements énormes gros diamètre ultra résistants
Câblés d'origine avec des prises PK 6 mm mâles

It's all there in plain French? 6 pole??

[killajb]

Just looked up some comments on Feigao's 580 motor.. Doesn't seem suitable for car use according to some. Check it:

http://forums.radiocontrolzone.com/s...d.php?t=234845

[Mister-T]

Originally Posted by bruce750i

Excuse my French but,

Caractéristiques :

2150 Kv
Bobinage 6 tours
Max 120A
Plus de 2000 Watts maxi
Voltage max recommandé : 25V
Diamètre : 45 mm
Longueur : 76 mm
Poids : 550 grammes
Entre axe trous de fixation : 25 mm standard 540
Format équivalent à un Speed 700 en taille
Axe moteur 5 mm avec méplat
Rotor néodyme diamètre 24 mm
Cage démontable
Roulements énormes gros diamètre ultra résistants
Câblés d'origine avec des prises PK 6 mm mâles

It's all there in plain French? 6 pole??

2150 Kv
6 turns winding
Max 120 Amps
Power 2000 watts maximum
adivsed Voltage : 25 volts (it will turn fast with such voltage ...)
Diameter : 45 mm
Lenght : 76 mm
Weight : 550 grammes
Space between mounting holes : 25 mm standard 540 size
Equivalent to Speed 700 i term of size (Speed XXX it a reference to old brushed motor used in RC Aircraft)
5 mm output shaft with plane
Neodymium Rotor with 24 mm diameter
Dismountable housing /casing / stator
Oversized ball bearing for long life
Default wiring with Banana plug (PK) size 6 mm

[jayjay283]

what does "very free wheeling" mean ? good for a tekno clutch system ?