Testing a couple of 1/10 120A ESC (Pictures of the 200A is in here too)

[lincpimp]

Originally Posted by lutach

Just plug the ESC's Rx plug and plug your pack to the esc and turn it on. It should power the program box and then you go through the settings that you need and press OK every time you change something before you jump to the other setting. You can also plug an Rx pack, but it's only needed when the ESC's BEC is disabled. I can make a quick video if you need .

Ok, got it, thanks!

[lutach]

The 100A, 200A and a few motors have shipped and I sould be able to track it tomorrow. They should be here in about 5 days. Now here is my problem, the only system out there that's like the 200A one is the RS Pro, but the RS Pro is smaller. I will post some pictures of when everything gets here. I can't wait to try out the 1.5T and 3T 540 motors.