What to wrap a motor magnet with?

[lincpimp]

Ok, good info, but what do I coat the string with to keep it on there?

Lutach, I have a few c50 motors and none are wrapped with kevlar... Are they just doing this with the new motors?

[lincpimp]

Would this stuff work?

http://cgi.ebay.com/Kevlar-twisted-t...QQcmdZViewItem

Also heres a pic of the magnet and can.

[lincpimp]

This stuff looks even better than kevlar for not stretching...

http://cgi.ebay.com/100-Feet-Vectran...QQcmdZViewItem

[lutach]

Originally Posted by lincpimp

This stuff looks even better than kevlar for not stretching...

http://cgi.ebay.com/100-Feet-Vectran...QQcmdZViewItem

That, Spectra and Zylon are all good stuff. You can find Spectra at you fishing store as some fishing lines are made of Spectra fibers.

[lutach]

You can use http://www.solarcomposites.com/compo...20sleeves.html and their Shrink Tube to make a nice Carbon/Kevlar wrapping. They come in different diameters and the link above even tell you the temps the epoxies can handle.

[lutach]

[QUOTE=lincpimp;234106]Would this stuff work?

http://cgi.ebay.com/Kevlar-twisted-t...QQcmdZViewItem


That seems to be what Novak used on my custom HV motors:

[lutach]

Originally Posted by lincpimp

Ok, good info, but what do I coat the string with to keep it on there?

Lutach, I have a few c50 motors and none are wrapped with kevlar... Are they just doing this with the new motors?

That's odd, all my C50's have their rotors wrapped. It's a very thin layer and grayish in color. Here is a picture of one of my C50 (The ION-X):

[lincpimp]

That is weird, All of my l can c50s do not have the wrap. I will open up the 10xl, but the 11xl did not have the wrap either...