Mamba Max and motor shopping for crt .5

[Metallover]

I am looking for a used mamba max. They seem to go really fast on here. I need a mamba max for my crt .5. I will probably be running 3s.(lipos anyone?) I will probably want the MM before the motor, but for a motor I was thinking a medusa/neu quality infunner ~3500kv or an inrunner ~36mm dia ~1500kv. Please shoot me a pm if you have any of the things above that you are looking to get rid of.

((I hope I'm not breaking any rules doing this))

[lincpimp]

I have a hyperion 3s 4250 lipo that is about 10months old, not much use. Pm me if interested. I do not have a MM for sale, but do have a MGM 80amp esc that would be good for a crt.5... As for a motor, I do not have anything other than a lehner 5300 and a medusa v2 60mm 1600kv...

Prices will be good...

[bdebde]

there ya go, da pimp has da hook up.

[lincpimp]

Originally Posted by bdebde

there ya go, da pimp has da hook up.

I do have a bunch of stuff... Need to clear it out as the stupid custom projects are starting...

[Metallover]

I think I have a deal for the esc. I hope it goes through. The motor will be the next thing I tackle.

For tires on this kit I am thinking prolone gladiators m3 compound for bashing around on the street and gravel/Dirt. Anyone have any other thoughts?

[hoovhartid]

i think the m3 is the softer compound, you may want to go with the m2 if you're just bashing. They should last longer.

[rootar]

yea, if id stick with m2 just for bashing m3 wear pretty fast on pavement, btw sent you a pm if the slash and setup isnt for sure sold (gotta make sure with the guy today) then ill sell you the MM w/ cc bec, 9L with new bearings and rcm clamp, and a 3s 5000 maxamps pack all less than half what they cost AND ill GIVE you a set of (4) brand new 12mm hex traxxas dish wheels (electric front offset) and a brand new pair of gladiator M2 tires, so youll only need one pair of tires to finish the set.......... ill let you know this afternoon.

[Metallover]

Originally Posted by rootar

yea, if id stick with m2 just for bashing m3 wear pretty fast on pavement, btw sent you a pm if the slash and setup isnt for sure sold (gotta make sure with the guy today) then ill sell you the MM w/ cc bec, 9L with new bearings and rcm clamp, and a 3s 5000 maxamps pack all less than half what they cost AND ill GIVE you a set of (4) brand new 12mm hex traxxas dish wheels (electric front offset) and a brand new pair of gladiator M2 tires, so youll only need one pair of tires to finish the set.......... ill let you know this afternoon.

I just sent 85 dollars for a mamba max, hardly used. I am down to zero in paypal... When i sell my reccoil and Vendetta I should have enough to finish off this project. I'll probably get 250-300 for it all. If anyone is interested in a recoil pro roller or a brushless vendetta pm me.

[Unsullied_Spy]

$85 for a MM is a good deal. They go really fast because nobody wants to sell theirs and everyone wants one! If you can get Linc's motor that'll be pretty insane. Most people run a 50mm sized motor in theirs and it goes quite well.

[Metallover]

I agree on the 85 dollars. Can't wait til I get it.

I'm thinking of running an outrunner. Does anyone know if this will work well on 3s?
http://www.hobbycity.com/hobbycity/s...idproduct=7073

BL-Power used an outrunner on 4s in his .5
http://www.rc-monster.com/forum/show...ight=outrunner

[RCShocker]

If you really need an Outruneer I still have one. An Axi Outrunner motor that I am trying to sell......100% BNIB
Let me know if I can be of assistance.


http://www.rc-monster.com/forum/showthread.php?t=15597

I ran GladiatorM2's on my CRT.5
And I have 2 used tires & foams leftover.