BidProduct 540 Finned Cans. "how to get front endbell off?"

[Takedown]

I tried that when it was heated and it still didnt budget.

Im going to try this next.

I have a spare outrunner 25mm spacing mount that Im going to screw onto the front endbell with 4 screws and use those longer prongs for leverage.


"silver mount"

[lutach]

Just screw the front end off, I did it yesterday to look at the rotor. The wire side is held with the screws, but you'll have to tap it out since it's glued on as well. I can make a quick video if you want?