setup for crt.5???

[MetalMan]

When I had my CRT.5 my setup was a Feigao 9L finned can, MM with CCBEC, 3s 4000mah 20C Lipo, with a 14t pinion. It would do about 45mph on 2.2 truck tires, and temps were a bit hot at 140-160 on MM and motor, but this was an awesome setup that could run for about 15mins.

[GO-RIDE.com]

I'm running the RCM chassis, MM, Medusa 50x3300, 3S 4000. I easily get 15-20min, but mostly drive an indoor track. I think I'd still get 15min even doing mostly speed runs. Motor temps are cool, but MM gets to 150F.