Lipo repair

[Metallover]

I ended up getting heatshrink at cheapbatterypacks.com. My next hobbycity order will have a ton of wire heat shrink too.

[NoControl]

ok, Hey Linc think its pretty cool your doing all this, do you know what company makes the hyprion style balance taps, and or where you get them from? I wanna switch some zippys from xh to hyperion to avoid buying an adapter.

[skellyo]

Originally Posted by NoControl

ok, Hey Linc think its pretty cool your doing all this, do you know what company makes the hyprion style balance taps, and or where you get them from? I wanna switch some zippys from xh to hyperion to avoid buying an adapter.

rclipos.com
cheapbatterypacks.com

[NoControl]

I was refering to the white peice only, so i could pull off the old xh connector and replace it with the hyperion style and still use the original wires.

[lincpimp]

Originally Posted by NoControl

I was refering to the white peice only, so i could pull off the old xh connector and replace it with the hyperion style and still use the original wires.

Can't do that, the little pin plugs are different.

[NoControl]

So it's either impossible or difficult to remove the xh connector, so that all I have is the wires, and the battery, then install them in a hyperion white connector without buying the "special" hyperion connector with wires or the xh board?

[lincpimp]

Originally Posted by NoControl

So it's either impossible or difficult to remove the xh connector, so that all I have is the wires, and the battery, then install them in a hyperion white connector without buying the "special" hyperion connector with wires or the xh board?

The type of crimped on pin that the xh connector uses will not phsically fit and clip in a hyperion connector. You either have to splice the hyp tap on, or remove the shrink and solder a new harness on. I would suggest an adapter, cheapest and simplest way out.