2650 kv bearing size ???

[MetalMan]

Originally Posted by Freezebyte

I was also curious, what sized bearing do we need to replace the Tork Flux motor ones?

It will be the same. The Tork motor is a CC2200 with a different can.

Originally Posted by MetalMan

It will be the same. The Tork motor is a CC2200 with a different can.

Which is what?

[prhess]

Originally Posted by Freezebyte

Which is what?

The tork 2200kv is the same motor as the neu castle 2200kv, but is black instead of green

Originally Posted by prhess

The tork 2200kv is the same motor as the neu castle 2200kv, but is black instead of green

Arrrrgh, I meant what size are the dumb bearings!!!

[prhess]

5x16x5

5mm - inside diameter
16mm - outside diameter
5mm - thickness

I know this for sure as I have replaced my castle-neus bearings. The front and rear are the same size.

Ah ok, perfect. I wonder what are the best bearings I could put in the Tork motor when it comes time to do so?

[prhess]

Originally Posted by Freezebyte

Ah ok, perfect. I wonder what are the best bearings I could put in the Tork motor when it comes time to do so?

There were the best I could find

http://www.bocabearings.com/main1.as.../C3_Z/S_#5_AF2 - 99.99 a piece
or
http://www.bocabearings.com/main1.as...=SMR625C-ZZ_#3 - 17.99 a piece

But I went with these due to cost

http://www.bocabearings.com/main1.as...MR625C-YUU_NB2 - 11.99 a piece