Need Extensive help...

[whitrzac]

are you pluging the batts in the corect spots on the esc, or are they series and on of the plugs on the esc jumped??

the novak BEC does not like 4s on one side...

[JThiessen]

Originally Posted by Semi Pro

sounds like you didnt remove the red wire on the esc's radio plug

remove the wire and the lvc will work fine, and yes it is your batterys are the real problem

No, that's not supposed to be done on the the Novak - or, if it was, Novak omitted this step from the "single pack" wiring instructions.

Originally Posted by whitrzac

the novak BEC does not like 4s on one side...

That's the purpose of running the Rx pack.

Did you do the "turn the esc switch on, then back off" when you first turned it on?

Also, this should be in the Novak forum - NovakTwo will tell you to email customer service with a detailed account of what is happening.

[Bondonutz]

Originally Posted by JThiessen

No, that's not supposed to be done on the the Novak - or, if it was, Novak omitted this step from the "single pack" wiring instructions.

Funny you mention that, In my older HV instructions it's there. In the HV Pro instuctions I didn't see it, I still did though because I felt it's still nessasary and it worked fine. Untill I bought a M.M.M. and sold the HV immediately after.