Unplug the fan and now, NO REVERSE!!

[bryan]

I had the same problem about 1 month ago.i removed all castle files from my computer ,re-downloaded and problem solved. Mine also would not recognize reverse durring calibration

[Emaxx_Quebec]

Originally Posted by bryan

I had the same problem about 1 month ago.i removed all castle files from my computer ,re-downloaded and problem solved. Mine also would not recognize reverse durring calibration

I'll try that

[Emaxx_Quebec]

Still not recognize reverse ( break) when calibration
firm ware 1.22

[bryan]

Do you have access to another computer ? I honestly do not think that its your esc. I could be wrong.try downloading the new firm ware 3.161 or whatever it is."look for errors before you finish"

[Emaxx_Quebec]

Not fixed yet.
When I reverse the trottle to normal position on the Futaba it go backward and the red light is on on the MMM.
Still can't breaking with the transmitter.
How can I tell if a Futaba sending signal?
Steering:OK
Trottle: OK
Ch3: OK
Break ( Reverse): Nothing

I'll try another radio tonight

[Emaxx_Quebec]

I just got time to work on this issue.
It appear that it'll not bo the MMM.
I tryed to calibrate the MMM with my old TQ3 and it worked perfectly.
So it'll probably be the Futaba 3PM.
I'll give you news.

[Pdelcast]

Originally Posted by Emaxx_Quebec

I just got time to work on this issue.
It appear that it'll not bo the MMM.
I tryed to calibrate the MMM with my old TQ3 and it worked perfectly.
So it'll probably be the Futaba 3PM.
I'll give you news.

Emaxx --

Sometimes the easiest way to fix a radio problem is to plug a servo into the throttle channel, and see what the throttle is actually doing. This way you can visually confirm exactly what the throttle channel is doing. This makes programming the radio a little easier.