Is This Bind

Originally Posted by Scott711

Did you disconect the motor from the driveline? You need to do that to test for cogging. You could just pull the pinion off. If you have then I would say you have some cogging or something dragging your tranny. I just did a test similar to yours with mine and it free wheels very fast with the pinion removed but goes about the same as your with the pinion still attached.

I removed the controller Motor and Batteries.

It got hot with stock diffs. I upgraded with FLM cups etc. I did the single speed gmaxx conversion, but it seems smooth.

I am going to put some weight back on the truck and test it again.

Thanks!