 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster Aluminum
Offline
Posts: 641
Join Date: Aug 2007
Location: lake conroe area, tx
|
01.31.2010, 09:11 AM
i have the 1200kv xl sitting in a box now awaiting a nice heavy project one day.
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
|
RC-Monster Brushless
Offline
Posts: 2,085
Join Date: Sep 2007
|
01.31.2010, 05:46 PM
Quote:
Hi Tash. What are you calling a "heavy project"? The 6mm id motor pinion I'm using is stainless. Are they any good? It snowed here before I got a chance to really test this out. Just a few short bursts on my cleaned off drive, shows a little cogging at startup/crawling speeds. But WOT results in a quick spin around. It was kinda wet out. I'm thinking about replacing the 40 tooth spur with a 46 tooth version. 25/40 changed to 25/46 Short tests were done on 5S. In about 10 minutes, the motor got up to around 130 degrees. |
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
