Project HYPERactive

[reno911]

Looks like you are running Caster battery trays.

If so i have had excellent experience running the Zippy 2650 line of cells with those trays. The cells are the same dimensions, which fit perfectly and the height depends on which pack you buy. I use the 4s in parallel but have had the 5s fit fine, as I assume the 6s would too.

http://www.hobbycity.com/hobbyking/s...35&search=2650

The decals have little to do with whats going on inside it on the stock body... just stuck them on to try and distract from the pink :P

5s in parralell would work with the 2650kv setup?
and yea, they are the caster racing battery boxes :P


Welll the moment you have all been waiting for... (yea right :P)

this is my paintjob....




wait... thats not right...

HERE'S my paint job!

[IMG][/IMG]

not bad for a first body ehh?

Also, a few pics of my electronics and the layout...




Enjoy!

[reno911]

Originally Posted by Bazzokajoe

5s in parralell would work with the 2650kv setup?
and yea, they are the caster racing battery boxes :P

Everywhere I have read the 2650 can handle 6s for brief speed runs, but it is only rated for a 4s lipo or 16.8 volts. I would stick with the 4s setup.