hacker C50 maxx with a snaped shaft...

[lincpimp]

L can rotor from a feigao?

[whitrzac]

Originally Posted by lincpimp

L can rotor from a feigao?

I can give it a try, but I need to order one...


does anyone(linc...) that they want to get rid of for cheap

[steveo]

the rotor from an L size motor will work i have used before, i had the same issue with my shaft, but for only $10 price difference for the L motor to use its shaft the quality is not the same

[whitrzac]

Originally Posted by steveo

the rotor from an L size motor will work i have used before, i had the same issue with my shaft, but for only $10 price difference for the L motor to use its shaft the quality is not the same

I was planing on getting an ebay/HK motor feigaos are tooo much

[ZippyBasher]

http://www.castlecreations.com/produ...pair_kits.html

1512 size? rotor Diameter may be a problem. But only $25

[whitrzac]

Originally Posted by ZippyBasher

http://www.castlecreations.com/produ...pair_kits.html

1512 size? rotor Diameter may be a problem. But only $25

the rotor from a tekin buggy motor fits, but the 4pole VS 2...


aka it cogs like a ******

[steveo]

Originally Posted by whitrzac

the rotor from a tekin buggy motor fits, but the 4pole VS 2...


aka it cogs like a ******

but its the stator that is 4pole, does the rotor have to match, are they 2,4,6, pole rotors?

i dont know if there is an easy fix i would like to get a good quality rotor for my c-50 if this works