 |
|
|
|
 |
 |
What size motor screws? |
 |
|
 |
|
(#1)
|
|
RC-Monster Stock
Offline
Posts: 8
Join Date: Jul 2010
Location: Ohio
|
What size motor screws? -
07.29.2010, 01:01 PM
Just got kd36-74-9xl motor, using the kyosho motor mount but it didn't come with screws, and I'm wondering what size screws I should use.
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Brushless
Offline
Posts: 3,156
Join Date: Jul 2005
Location: Gramercy, LA
|
07.29.2010, 02:03 PM
The motor has holes in the endbell for 3mm screws.
I like to use 3mm cap head screws. |
 |
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Stock
Offline
Posts: 8
Join Date: Jul 2010
Location: Ohio
|
07.29.2010, 06:47 PM
Thanks, how about length? I know too long is bad, but so is too short.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Titanium
Offline
Posts: 1,884
Join Date: Jul 2009
|
07.31.2010, 01:48 PM
Someone gave me this tip before: use a toothpick to see how deep the threads are until you contact the windings, then you can see how long of a screw you can use. Also, remember to factor in some length for going through the motor mount.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Stock
Offline
Posts: 8
Join Date: Jul 2010
Location: Ohio
|
08.01.2010, 12:12 AM
Thanx, I really didn't even think of something that simple.
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
