Mamba Monster Amp rating?

[nuz69]

With proper cooling, and BIG BIG BIG ESC everything is possible. But without cooling a 1527/1Y should do anyway some speed runs at more than 100mph without overheating and with the proper ESC. All we need to do is to check the temps.

[pinkpanda3310]

Originally Posted by naynay12

Hopefully the tranny wil hold up with the cc2200kv which i plan to use.
Howmuch amps does the cc2200kv pull?

Originally Posted by Pdelcast

From our testing about 200A on 4S and 350A+ on 6S during acceleration. Average draw at top speed is about 50A on 4S, and about 80A on 6S (at 50mph.)

This is from a thread about a savage. I know there not firm numbers but it might give you an idea.

Ok, thank you. Looks like a 12 pinion on 6s with mamba monster will be fine then.

[nuz69]

Originally Posted by pinkpanda3310

This is from a thread about a savage. I know there not firm numbers but it might give you an idea.

In a 1:8 scale buggy, the power needed during acceleration to top speed (40mph) was 120-130A on 4S. The savage is a lot heavier so the measurments correspond.