Concerned about new Savage Flux running a bit warm on test drive

[Bondonutz]

Once you get a temp gun, (should have ben bought long ago) I think you'll see your probably worrying for nothing.

Raising the punch control will help with temps as well, make sure your motor timing is set at Low or Normal at the most.

Originally Posted by Bondonutz

Once you get a temp gun, (should have ben bought long ago) I think you'll see your probably worrying for nothing.

Raising the punch control will help with temps as well, make sure your motor timing is set at Low or Normal at the most.

Punch is at 10% right now, timing is set to default

[Bondonutz]

Originally Posted by Freezebyte

Punch is at 10% right now, timing is set to default

I know, read it in the first post.

Like I said, if you raise the PC it will help w/temps

I think motor timing at default is "normal" and thats OK, but again on low it will help w/temps also.