More "SCT" motors

[kingdomracer]

Originally Posted by Pdelcast

Unfortunately, our rotor design is a little different the the Neu designs -- they are optimized for Wye windings, and don't make good Delta motors.

How about a 1415 .5Y? That would be about 4800Kv.

Thanx!

Patrick

Any updates on this motor, will it come to production?

[outlaw]

Originally Posted by Pdelcast

Unfortunately, our rotor design is a little different the the Neu designs -- they are optimized for Wye windings, and don't make good Delta motors.

How about a 1415 .5Y? That would be about 4800Kv.

Thanx!

Patrick

I would take one 100%
After seeing the 1410 1Y throwing around my RC8 to SC10 4x4 Conversion, I would love to have one, but please with 5mm shaft

[rootar]

yea itd be a hungry setup but in some of these heavy trucks, itd be great to have on the big tracks.

[rootar]

no it wouldnt be roar legal but it would be "2s limit" legal which is the rule 99% of tracks are following.

none of the 550s are legal either according to roar.

[littlejohn]

Can these 4 pole motors be driven by a RS Pro?

[jhautz]

Don't see why not. I've used an rspro to drive a Neu 1512 4 pole motor with no issue. The 1410 wont be any different.

[littlejohn]

Thanks... does anyone know if CC will be making sensored motors in the near future?
Like a sensored 4 pole would be TOPS..

[phatmonk]

So exactly how long is the motor with the MMP SC system.53mm or less?

[jhautz]

I did some experimenting today with the 1410 SCT motor in my Losi 810 buggy. This little motor is a freakin beast!! It ran like a raped ape on 3s with a different ESC. Ran a couple full practice packs on it and never saw temps over 140 degrees. Also ran it in some racing later in the day and after a 6 minute qualifier and a couple minutes of warm up laps it came off at 138 degrees. Broke in the main so I didnt get to see how it did there but Im sure it woulda been fine. This thing blew the Novak HV motor I was running completely out of the water. Not even a contest.

Dont know how you did it Castle, but DMAN this is a good motor for the money!! Nice work!!!!!!! Only wish I have, like others have asked, is for a version with a 5mm shaft and this would be a perfect motor.

[Pdelcast]

Originally Posted by phatmonk

So exactly how long is the motor with the MMP SC system.53mm or less?

52.95mm. It has already been accepted by ROAR for SCT racing.

[jhautz]

Patrick.

Any chace of a 5mm shaft version of the 1410 and 1412?

[snellemin]

Originally Posted by jhautz

Patrick.

Any chace of a 5mm shaft version of the 1410 and 1412?

I asked this before and got no answer so far.

[samintrepid]

I have the new stampede 4x4 and i want put the sct combo MMP 2400 but with 4S lipo the truck are pretty heavy or i do wait for the next sct combo MMM 4800 2S lipo. which combo are the best for this truck (more efficiency) ? thank !

[phatmonk]

More than1websiite thats selling the MMP SC combo states the motor is a 1415 36mm x 70mm.Either way I have allready bought the MMP SC combo.Does the MMP SC ESC have a specific software profile for its application?

[phatmonk]

Since Neu uses the same 1515 rotor in the 1415 is the castle 1415 1y able to use a Monster 1515 1y rotor.Yea i know the kv values are different.I bought the MMP SC combo sold the ESC and end up paying 40 bucks for a new 1415 1y.I love pee bay.