WhataNut FMA PowerLab8 1000W charger

[SunnyHouTX]

Originally Posted by snellemin

The fuseblock is nice, as you can attached multiple charge leads/connectors to it.

I use the 4mm bullets from the cheapo Chinese lipo packs that come with 10AWG wires.

I'm going to give the ones I got a chance first. Then I might have to go to what you're using. Good thing the fuse block is good: I ordered two of them.

[MindThoughts]

These 40amp wires are also available now as well :)

Direct Link:
http://www.fmadirect.com/detail.htm?...410&section=91

Below is a copy of an E-Mail I received (I signed up to receive new product notifications).

New Stock at FMA Direct
Cellpro PowerLab 40A Banana Plugs
$14.95
New 40A cables are required when parallel charging 2 or more packs on the new PowerLab 8 V2. The new V2 firmware is available to download if you want to upgrade a PowerLab 8 V1 model to get the full 1344W output power of V2.

Free V2 PL8 Charge Control Software (CCS)

Now shipping Cellpro PowerLab 8 V2 chargers and combos on the Revolectrix website.