New 9920/10xl steering sluggish

[neweuser]

My servo is the Hi tec mg625hs. But it worked fine with my hv maxx

[sjcrss]

so it has the following specs then

Hitec625HS....the hs stands for high speed....in case your wondering
Operating Speed (4.8V): 0.16sec/60 degrees at no load
Operating Speed (6.0V): 0.13sec/60 degrees at no load
Stall Torque (4.8V): 76.37 oz/in. (5.5kg.cm)
Stall Torque (6.0V): 94.43 oz/in. (6.8kg.cm)


it should work...@ the 6v range o.k...

p.s. a new email sent your way....

[Batfish]

Originally Posted by neweuser

My servo is the Hi tec mg625hs. But it worked fine with my hv maxx

That's the 5V vs. 6V difference. Put 6V back into the servo and you'll see it come back to life.