Best Slipper and reverse questions

[Major Azzwoopin]

i picked up some bearings this morning. I will let you know if it fixes me up this afternoon. BTW I think alot of the heat that was being generated with the metal spur was the pinion spur meshing. When I pulled the pinion off the leading edges were all kinda rounded. So that must have been some serious friction being generated there. I didn't notice any spur wear on the plastic before the center heated up and melted out. Also the pad was in good shape and I got better acceleration than I did with the metal spur.
So we'll see. I'll try it this evening and post back