UE SuperShocks on stock suspension

[Sneeck]

Not without a minor modification. You need to put a small piece of fuel line or other spacer to limit the travel. Stock suspension can't handle such big shock's, had them myself on rpm arm's and without the spacer it sucked.

Originally Posted by Sneeck

Not without a minor modification. You need to put a small piece of fuel line or other spacer to limit the travel. Stock suspension can't handle such big shock's, had them myself on rpm arm's and without the spacer it sucked.

To limit the downward travel right? If so, I have an idea...

On the stock lower arms the bottom shock mount screw holes are raised up. If you were to cut these off and have the shocks mount onto the arm like a truggy. There is just a hole cut out in the arm for them to fit in and a hole for the screw. It would mean that the shocks would have to be about 15mm longer or so, to fit perfectly. I'm not sure how long the UE ones are.