Unplug the fan and now, NO REVERSE!!

[Matthew_Armeni]

You should have your throttle ch set to normal, not reverse. I don't know if that'll fix the problem, but I know when I had my transmitter setup with the throttle ch in reverse my ESC did some funky things.

[BrianG]

Unless it's a Futaba radio, where the throttle is reversed normally...

[Matthew_Armeni]

Originally Posted by BrianG

Unless it's a Futaba radio, where the throttle is reversed normally...

Woops, I really missed that.

[bryan]

I had the same problem about 1 month ago.i removed all castle files from my computer ,re-downloaded and problem solved. Mine also would not recognize reverse durring calibration

[Emaxx_Quebec]

Originally Posted by bryan

I had the same problem about 1 month ago.i removed all castle files from my computer ,re-downloaded and problem solved. Mine also would not recognize reverse durring calibration

I'll try that

[Emaxx_Quebec]

Still not recognize reverse ( break) when calibration
firm ware 1.22

[bryan]

Do you have access to another computer ? I honestly do not think that its your esc. I could be wrong.try downloading the new firm ware 3.161 or whatever it is."look for errors before you finish"

[Emaxx_Quebec]

Not fixed yet.
When I reverse the trottle to normal position on the Futaba it go backward and the red light is on on the MMM.
Still can't breaking with the transmitter.
How can I tell if a Futaba sending signal?
Steering:OK
Trottle: OK
Ch3: OK
Break ( Reverse): Nothing

I'll try another radio tonight

[Jarvis]

Read page 21 of this manual

http://manuals.hobbico.com/fut/3pm-fm-fs-manual.pdf