Testing a couple of 1/10 120A ESC (Pictures of the 200A is in here too)

What brand are the 1.5 and 2.5 hv motors ?

[lutach]

Originally Posted by ffactory666

What brand are the 1.5 and 2.5 hv motors ?

The HV1.5 and HV2.5 are Novaks.

Originally Posted by lutach

The HV1.5 and HV2.5 are Novaks.

Thanks .
Keep us informed of how your 200amp esc goes on the weekend on 4s .For the 2s speed car which esc would be better suited , your 120amp or the 200amp ?

[SunnyHouTX]

You have PM.

[lutach]

Originally Posted by SunnyHouTX

You have PM.

Replied.

[snellemin]

Nice solid launch man.

[lutach]

Originally Posted by snellemin

Nice solid launch man.

Yes, it was a good launch, but I have no idea what went wrong at the end. I didn't have time to correct the bike and it went off flying in style.

Nice bike , what's the record for the bikes ?

Stop teasing now with the 200A esc when will you be selling these

[lutach]

Originally Posted by ffactory666

Nice bike , what's the record for the bikes ?

Stop teasing now with the 200A esc when will you be selling these

They say nobody has gone bellow 2.00 yet and that's what I'm shooting for. I don't know how much to sell the 200A esc for.

Originally Posted by lutach

They say nobody has gone bellow 2.00 yet and that's what I'm shooting for. I don't know how much to sell the 200A esc for.

Sell the esc for as cheap as possible

I'm sure you will work out a competitive price , when you do PM thanks as i will use it in my 2s speed record pan car .

Question on the speed car , do you think heavier lipos are better or lighter ones . I am looking at either the SMC 28c 4000mah or 5000mah packs , but i am thinking the heavier battery would help keep the car on the ground .

Any other battery you can recommend that will handle the amps drawn with the Vortex 2.5t motor and gearing you recommended . I have chosen the SMC packs as i know they will fit in the car i am buying and they are top quality cells .

2.00 with a bike is impressive , good luck on the challenge .

[DwightSchrute]

Lutach,

any word on when the 200A escs will be available?

[lutach]

Originally Posted by DwightSchrute

Lutach,

any word on when the 200A escs will be available?

They should be coming in soon now. It takes a little extra time to make them.

[lincpimp]

Hey Luciano, got the esc in today. How do I go about hooking up the program card? Just plug the rec wire ito the slot on the card and also plug in a rx nimh pack into the card too? I see it has two areas to plug into. Also, do I have to have a pack plugged into the esc during programming?

[lutach]

Originally Posted by lincpimp

Hey Luciano, got the esc in today. How do I go about hooking up the program card? Just plug the rec wire ito the slot on the card and also plug in a rx nimh pack into the card too? I see it has two areas to plug into. Also, do I have to have a pack plugged into the esc during programming?

Just plug the ESC's Rx plug and plug your pack to the esc and turn it on. It should power the program box and then you go through the settings that you need and press OK every time you change something before you jump to the other setting. You can also plug an Rx pack, but it's only needed when the ESC's BEC is disabled. I can make a quick video if you need .

[lincpimp]

Originally Posted by lutach

Just plug the ESC's Rx plug and plug your pack to the esc and turn it on. It should power the program box and then you go through the settings that you need and press OK every time you change something before you jump to the other setting. You can also plug an Rx pack, but it's only needed when the ESC's BEC is disabled. I can make a quick video if you need .

Ok, got it, thanks!