Testing a couple of 1/10 120A ESC (Pictures of the 200A is in here too)

[snellemin]

Does yours have the same features as the RSPRO does? What's the power wire AWG? Will cost be similar to the RSPRO?

[lutach]

Originally Posted by snellemin

Does yours have the same features as the RSPRO does? What's the power wire AWG? Will cost be similar to the RSPRO?

Both my ESC have the hybrid sensored/sensorless function. Mine comes with a program box for easy set up. The 200A 10GA power wires (That's what the sample unit I have here has). It will not cost the same as the RS Pro, it'll be a bit cheaper.

[snellemin]

aaaaaw fat wires get me hot. I just blew my money on some things I needed to stress out your other ESC, so it will be a bit longer before I get one from you to abuse. However, HOLD ONE for me.

[lutach]

Originally Posted by snellemin

aaaaaw fat wires get me hot. I just blew my money on some things I needed to stress out your other ESC, so it will be a bit longer before I get one from you to abuse. However, HOLD ONE for me.

. Man, when lincpimp sees that you like fat wires, you're in trouble . Linc is testing a 100A sensored and I asked him to post any feedback here. I like how you're beating the crap out of the 1/8 scale ESC.

[snellemin]

Yea I figured lincpimp would get a kick out of that one after I posted it.

The 1/8 scale ESC is doing very well so far. If it passes my last test, then it was money well spent.

[lutach]

Hey linc,

Any good news on how the ESC does in the crawler? Let me know if it's working good and would a 50-60A sensored esc be better as the crawlers don't use a lot of amps?

Regards.

[tom255]

60A ESC in crawler is more than enoug.
One guy using in his 2.2 class crawler 22A Quark, and it works perfect!

[lutach]

The ESCs and motors are here. The 1.5T has a Kv of 18102rpm, it would have been higher, but the factory opted to use the rotor with a fan, so the Kv is lower and I'm hoping it'll work as planned. All the high Kv motors have Kevlar wrapped magnets. I'm going to push for the 2T and 1T delta motors as they seem a lot easier to do then the Y ones. All the 200A version comes with 10GA power wires and they look great.

[BL_RV0]

What KV do the rotors stay kevlar-wrapped until?

[DwightSchrute]

Lutach,

PM sent

[snellemin]

I received the 200A esc last nite. Fast shipping as usual.

I left a first impression review Here and the problem I encountered.

[lutach]

Originally Posted by snellemin

I received the 200A esc last nite. Fast shipping as usual.

I left a first impression review Here and the problem I encountered.

Let me know how your testing goes snellemin after you add your caps.

[lutach]

Hey lincpimp,

How is the 100A doing in the crawler?

[e-mike]

seriously i want one of these combowhen is the release date

[lutach]

Originally Posted by e-mike

seriously i want one of these combowhen is the release date

Lets see how testing goes. I can send you more info on them if you wish. Just send me an e-mail at brasuca2478@hotmail.com.